PRESONUS FIRESTUDIO MOBILE - 10X6 FIREWIRE RECORDING SYSTEM

PRESONUS FIRESTUDIO MOBILE - 10x6 FIREWIRE RECORDING SYSTEM

10x6 mobile FireWIre interface with XMAX mic preamps, digital conversion, JetPLL Sync, and more.

The PreSonus FireStudio Mobile Recording System combines the superior analog-circuit design and advanced platform technology of PreSonus' acclaimed FireStudio rackmount interfaces with the ability to run on bus power in field applications. Now you can have enhanced audio performance for music recording and creation anywhere you can lug your laptop.

The FireStudio Mobile is a ten-input, six-output professional audio recording system that combines two PreSonus XMAX Class A microphone preamplifiers; six line-level, analog input channels; S/PDIF digital input and output; MIDI I/O; and headphone monitoring with separate gain control. The FireStudio Mobile gives you tons of flexibility and a high input count making it possible to record a whole band. It's also bundled with PreSonus Studio One Artist, a groundbreaking music creation program, and over 4GB of virtual instruments, plug-ins, loops, and samples to get you started making music immediately.

PreSonus FIRESTUDIO MOBILE Specifications:

• System Requirements
• Windows:
• OS: Microsoft Windows XP and Windows Vista
• CPU/Clock: or Athlon 900MHz (1.5GHz or higher recommended)
• Memory(RAM): 1GB (more recommended)
• Macintosh:
• OS: MacOS X 10.4.x or later (10.5 supported with driver update)
• CPU/Clock: PowerPC G4/Dual 1GHZ or faster, all Intel-based Mac models
• Memory(RAM): 1GB (more recommended)
• Windows and Macintosh Systems:
• IEEE 1394 FireWire 400 Port
• Internet connection
• DVD-ROM drive
• Internal or external 7200RPM storage drive is highly recommended
• Note that the speed of your processor, amount of RAM, and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) that you might experience while monitoring audio or MIDI signals.
• Monitor resolution for both PC and Macintosh should be no lower than 1024 x 768 pixels.
• System Requirements for Studio One Artist
• Mac: Mac OS X 10.4.11 or Mac OS X 10.5.2 or higher, PowerPC G4 1.25GHz or Intel Core Solo 1.5GHz processor, 1GB RAM
• Recommended: PowerPC G5 or better or Intel Core Duo or Intel Xeon processor or better, 2GB or more RAM
• Win: Windows XP or Vista, Intel Pentium 4 1.6GHz processor or AMD Athlon 64 (Turion), 1GB RAM
• Recommended: Intel Pentium 4 2.8GHz EM64T or better or AMD Athlon 64 3000+ or better, 2GB or more RAM
• Windows and Macintosh Systems: Internet connection, DVD-ROM drive, a monitor resolution no lower than 1024x768 pixels
• Known compatible and incompatible hardware
• Microphone preamp (XLR Balanced)
• Frequency response (+0, -0.5 dB): 20Hz to 50kHz
• Frequency response (+0/-3.0dB): 20Hz to 150kHz
• Input impedance: 1.6 kOhms
• THD + N (unwtd, 1kHz @ +4dBu Output, Unity Gain): < 0.008%
• EIN (unwtd, 55dB Gain, 150O Input, 20Hz to 22kHz): –130dBu
• S/N Ratio (Unity Gain, unwtd, Ref = +4dBu, 20Hz to 22kHz): >101dB
• Common Mode Rejection Ratio (1kHz, 55dB Gain): >55dB
• GainControl Range(± 1dB): –10dB to 70dB
• Maximum Input level (Unity Gain, 1kHz @ 0.5% THD+N): +14 dBu
• Phantom Power (± 2 VDC): +48 VDC
• Instrument Input: (1/4" TRS, Channels 1 & 2)
• Type: TS Female Unbalanced
• Input Impedance: 1 MOhms
• Main Outputs:
• Type: 1/4" TRS Impedance Balanced
• Output Impedance: 51Ohms
• Headphone Output
• Type: 1/4" TRS Active Stereo
• Maximum Output: 150 mW/CH @ 60 Ohm Load
• Frequency Response: 10Hz-70kHz
• Digital Audio:
• FireWire (IEEE 1394) Speed: 400 Mbps
• ADCDynamic Range(A-wtd, 48kHz): 118dB
• DACDynamic Range(A-wtd, 48kHz): 118dB
• Bit Depth: 24 bits
• Reference Level for 0 dBFS: +10dBu
• Internal Sample Frequency Selections: 44.1, 48, 88.2, 96kHz
• Clock:
• Jitter: <20 ps RMS (20Hz-20kHz)
• Jitter Attenuation: >60dB (1 ns in => 1 ps out)
• Power:
• Bus Power: 6-pin FireWire 400 or FireWire 800
• Power Supply: External Switching Supply (12 VDC/1A)
• Dimensions (WxHxD): 5.5" x 1.75" x 5.5"/ 139.7mm x 44.5mm x 139.7mm
• Weight: 4.5lb./2 kg