Brand Finder

Crown XTI1002 2-Channel 500w Power Amplifier

SKU: CRN-XTI1002 SAVE 20%!

Crown XTI1002 2-Channel 500w Power Amplifier 

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

Product Features

  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect™ control software
  • Increased number of presets to a total of 50; 49 of which are user definable

Want to know more? Please click here for more information

(CRN-XTI1002)

CROWN XTI1002 2x500w Power Amplifier
Integrated Processing

 

 

Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.
Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.
Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.
Delay For signal alignment of driver; 50 mS of total delay.
SubHarmonic Synth Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.
Peakx™ Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times.
Presets 50 total presets, 49 of which are user-definable.


Performance

 

 

 

Sensitivity (for full rated power at 4 ohms)
 
1.4 Vrms
Frequency Response (at 1 watt, 20 Hz - 20 kHz) +0 dB, –1 dB
Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms) XTi1002/2002/4002: 100 dB (A weighted)
XTi6002: 103 dB (A weighted)
Total Harmonic Distortion (THD) < 0.5%
Damping Factor 20 Hz to 1 kHz > 500
Crosstalk (below rated power) 20 kHz - 1 kHz: > 70 db
Input Impedance (nominal) 20k ohms balanced, 10k ohms unbalanced
Maximum Input Signal +22 dBu typical
AC Line Voltage and Frequency Configurations 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
AC Line Current
(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)
XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle
Operating Temperature 0°C to 40°C at 95% relative humidity (non-condensing)

 


Controls

 

 

 

Level Two front-panel rotary level controls, one for each channel
Power Switch On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen Backlit liquid crystal display that shows preset and processing status

 


Indicators

 

 

 

Signal Indicator Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
–10 Indicator Green LED flashes when output signal exceeds -10 dB below clip.
–20 Indicator Green LED flashes when output signal level exceeds -20 dB below clip.
Ready Indicator Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator Blue LED illuminates when the amplifier has been turned on and has power

 


Input/Output Connectors

 

 

 

Input Connectors XLR, one per channel
Link/Out Connector Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors).
HiQnet™ USB Connector Type B, connects to HiQnet™ network.

 


Construction

 

 

 

Chassis Steel
Front Panel Cast-aluminum
Cooling Proportional speed fan with front-to-rear airflow.
Dimensions XTi 1002/2002/4002: 19" (W) x 3.5" (H) x 12.25" (D)
XTi 6002: 19" (W) x 3.5" (H) x 16.2" (D)
Net Weight XTi 1002/2002/4002: 18.5 lbs (8.4kg)
XTi 6002: 24.0 lbs (10.9kg)
Shipping Weight XTi 1002/2002/4002: 21.5 lbs (9.8kg)
XTi 6002: 30.0 lbs (13.6kg)

 

SKU CRN-XTI1002
Barcode # 871015005232
Brand Crown:Amps General
Shipping Weight 9.4000kg
Shipping Width 0.490m
Shipping Height 0.180m
Shipping Length 0.570m

Be The First To Review This Product!

Help other Bavas Music City users shop smarter by writing reviews for products you have purchased.

Write a product review

Product Enquiry Form Complete this form to email us your enquiry.

 

Yes, We Price Match

Complete the form below to submit your claim

Thanks for the opportunity to Price Match this product for you. Once this Price Match request is received we will look into it and get back to you (normally within 1 business day). If you leave us your phone number that will be the quickest way to get a response. If not, then we will respond by email, no problems.

In most cases we can match any authorised Australian retailer’s price as long as they currently have stock. Sometimes we may even be able to beat their price for you, so it’s certainly worthwhile taking a moment to fill in the request.

Why choose Bavas Music?
  • When you shop with Bavas Music you are supporting a 100% Australian owned business with stores across the country.
  • We have passionate staff with the expertise to help you with any after sales support you may require.
  • We only source our products from the Authorised Australian Distributors giving you legitimate Australian warranty and distributor support.
  • Your Price Match request will help us continue to offer the best prices and service in the country.